|
This material safety data sheet conforms to the U.S. Department of Labor Occupational Safety and Health Administration requirements
in 29 CFR 1910.1200 and is an integral part of any “Right To Know” program.This information should be read by customers
and made available to anyone who has reason to use or to come in contact with this product.
Section 1: Product and Company Identification
-
Product Name: CORBI Corrugated Sheet / Solid Sheet
- Product Description: Polypropylene / Ethylene Copolymer
- Chemical Family: Proprietary Formula
Section 2: Hazardous Components
- Chemical Name: C..A.S. # 9010-79-1
Important Note:
Pigments, additives and stabilizers are fully encapsulated in resin and
are not expected to cause any hazardous conditions when processed
in accordance with good manufacturing practices.
Any substance listed in Section 2 are those identified as being present
at a concentration of 1.0% or greater, or 0.1% or greater if the substance
is on the list of potential carcinogens cited in the OSHA HAZARD
COMMUNICATION STANDARD or by the respective manufacturer.
Where a proprietary ingredient shows, the identity of this
substance may be made available as provided in 29 CFR 1910.1200.
Section 3: Fire and Explosion Data
- Fire Extinguishing Media: Carbon Dioxide, Foam, Dry
Chemical,Water Spray.
- Special Fire Fighting Procedures: Recommend NIOSH
approved self contained breathing apparatus.
- Unusual Fire and Explosion Hazards: Decomposition and
combustion products may be hazardous.
Section 4: Health Hazard Data
- Effects of Acute Overexposure: None Known
- Emergency First Aid Procedures: If burned by molten
material, cool as quickly as possible with water and see a
physician to remove adhered material and treatment of
burn.
- Smoke or Dust Inhalation: Remove person to fresh air and
consult a physician.
|
Section 5: Reactivity Data
- Stability: Stable Material
- Conditions to Avoid: None Known
- Incompatibility (Material to avoid contact with): None
Known
- Hazardous Decomposition By-Products:Thermal
decomposition and burning may produce Carbon
Monoxide and Carbon Dioxide.
- Hazardous Polymerization: Will not occur.
Section 6: Spill or Leak Procedures
- Steps To Be Taken In Case Material Is Released Or Spilled:
Sweep up and return to container or discard if
contaminated.
- Waste Disposal Method: Solid waste disposal in
accordance with Federal, State, and Local Regulations.
Section 7: Special Protection Information
- Respiratory Protection: Particulate Mask. If dusting occurs,
use a chemical respirator.
- Ventilation: Local exhaust, good building ventilation.
- Special Ventilation Requirements: None, however dust
creation should be minimized.
- Hand/Skin Protection: Cloth gloves to prevent cuts and
scrapes and edges.
- Eye Protection: Safety glasses or chemical goggles.
- Other Protective Equipment: None needed.
Section 8: Special Precautions or Comments
- Precautions To Take In Handling and Storage: None. Normal
bulk storage and handling of plastic. Do not expose
material to excessive heat, cold, or moisture.
- Shipping Designation: Plastic sheets, flat.
- D.O.T. Class/Number Required: Not regulated.
|
| IMPORTANT NOTE:
Information and recommendations contained herein are based on sources considered to be dependable, and is accurate and reliable to the
best of our knowledge. Since; however, safety data and standards, as well as government and state regulations are subject to change, and
the conditions of handling and use, misuse are beyond our control, no guarantee or warranty of any kind, expressed or implied, is made. |
Download the CORBI MSDS Sheet.
Chemical Resistance | Material Safety Data Sheet | Product Tolerances | Material Specifications |
